Select Metric Units

 Top  Previous  Next

Project Options - "Select Metric Units" - (These 'Cutting Parameters' are extracted from Existing Open Cutting Projects)

 

cutallowance_32x32

 

To select Millimetres - 'Metric' Units

 

1.        From the Tools menu, choose Project Options then select Cutting Parameters.

 
2.        To set Optimumcut-1D  to function using Millimetres - 'Metric' Units select the following parameters.
 
metricunits
 
3.You can set your own workshop specific Thickness of sawcut, Amount of bar-end trim so as to remove damaged ends and Minimum length of offcuts to recycle.